What the Stealth Edition Sound Is About
The 4" Stealth Edition axleback is REMARK's evolution of their earlier 3.5" black-painted system. Instead of high-temp paint, the entire exhaust — not just the tips — receives a professional Cerakote coating by a certified applicator in Southern California. The coating changes the visual character of the exhaust, but the sound comes from the core design: a 4" single-wall quad-tip, 2.5" mandrel-bent T304 stainless piping, and a direct bolt-on two-piece axleback layout.
For a 2015-2021 WRX or STI VA chassis, this axleback delivers a deeper, fuller note than the factory mufflers. The 4" tips and single-wall construction produce a pronounced exhaust tone without being obnoxious at cruising speeds. It is louder than a stock system but remains daily-friendly compared to a full catback with a straight-through midpipe.
Critical Fitment Rules Before You Order
This axleback bolts directly to the factory OEM midpipe or to a REMARK mid Y-pipe. It does not fit aftermarket exhaust systems, and it is not interchangeable with the Sports Touring catback. The most important compatibility note: the Stealth Edition does not work with the OEM factory SPT midpipe. If your WRX or STI has the Subaru Performance Tuning midpipe, this axleback will not attach correctly.
The system is sold as a set (right and left sides). Installation is a direct bolt-on using the included serrated hardware. The serrated nuts and bolts are designed to dig into the stainless steel to prevent loosening, but they may cause minor chipping or scuffing of the Cerakote finish during installation. This is normal and not a defect.
Stealth Edition Specifications That Affect Sound and Fit
- Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021]: 2.5-inch, 16-gauge, mandrel-bent T304 stainless piping with a 4-inch single-wall quad-tip design. The 2.5" pipe diameter maintains good exhaust velocity for the VA turbo engine, while the 4" single-wall tips contribute to a deeper, more resonant tone than smaller or double-wall tips.
![Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021]](/uploads/sites/7011/import-1790100028559-499607013.jpg)
Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021] - Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021]: The entire system is Cerakote coated by a certified applicator, not just the tips. Cerakote provides better heat tolerance and durability than paint, but the coating can still be scratched by the serrated hardware during installation. The finish is cosmetic and does not affect sound performance.
- Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021]: Direct bolt-on to factory OEM or REMARK mid Y-pipe; does not fit aftermarket exhaust systems or OEM SPT midpipe. If you have an aftermarket midpipe or the SPT midpipe, you need either a different axleback or a compatible midpipe section before this will fit.
Cerakote Finish vs. Paint: What Changed
Earlier REMARK Stealth axlebacks used high-temperature black paint. The current Stealth Edition switches to Cerakote for superior durability, heat capacity, and finish consistency. The coating is applied after full surface preparation, which helps it resist flaking better than paint. If you are comparing the Stealth Edition to a raw stainless or burnt-tip version, the main trade-off is appearance and longevity versus the ability to polish out scratches. The sound profile is identical across finish options for the same tip and pipe design.
For care, avoid abrasive cleaners. A mild soap-and-water rinse with a soft cloth is sufficient. The coating does not require reapplication under normal use.
How It Sounds in Real Driving
At idle, the 4" single-wall tips produce a low, steady hum with a slight growl. Under light throttle, the exhaust note becomes more present without being intrusive. During hard acceleration, the tone opens up with a pronounced mid-range bark and a smooth tail-off at higher RPM. On the highway, cabin resonance is moderate — noticeable but not fatiguing for daily commutes. The system does not eliminate the stock exhaust's ability to pass sound checks at most tracks, though local regulations vary.
Because this is an axleback (not a catback or full turbo-back), the sound change is primarily at the tail section. The factory midpipe and catalytic converter remain in place, so the overall volume increase is moderate compared to replacing the entire exhaust path. If you want a more aggressive sound, you would pair this axleback with a REMARK midpipe or catback later.


![Axleback (4" Stealth Edition) - Subaru WRX/STI VA [2015-2021]](https://remarkecp.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F7011%2Fimport-1790100028559-499607013.jpg&w=800&q=86)