Back to Blog
Buying Guides 2026-11-13 REMARK Exhaust 0 views

Lexus IS and RC Axleback Exhaust: Choosing the Right Fit

Lexus IS and RC Axleback Exhaust: Choosing the Right Fit

Match a REMARK axleback to your Lexus IS or RC by year, drivetrain and engine, then pick the tip finish and know the drone trade-off before you order.

Start with your car, not the sound clip

The REMARK axleback is a bolt-on replacement for the factory mufflers, so the first decision is which listing matches your car. The IS listing covers the Lexus IS200t, IS250, IS300 and IS350 from 2017 to 2020. The RC listing covers the RC200t, RC300 and RC350 from 2015 onward. Both fit RWD and AWD, but the notes below matter more than the badge on the trunk.

One exclusion is explicit: the IS listing does not fit 2014–2016 Lexus IS models because of factory bumper and diffuser differences. If you own an earlier IS, this is not a trim or tip question — the part is not listed for your car.

What each listing actually covers

  • Axleback (Muffler Version) - Lexus IS200T / IS250/ IS300 / IS350 [2017-2020]: Fits Lexus IS 200t / IS250 / IS300 / IS350 2017-2020, RWD and AWD, as a 2pc bolt-on axleback. This is the listing to use for a 2017–2020 IS; the year range is the hard boundary, not a suggestion.
    Axleback (Muffler Version) - Lexus IS200T / IS250/ IS300 / IS350 [2017-2020]
    Axleback (Muffler Version) - Lexus IS200T / IS250/ IS300 / IS350 [2017-2020]
  • Axleback (Muffler Version) - Lexus RC200t/ 300/ 350 [2015-2025]: Fits Lexus RC 200t / RC300 / RC350 2015+ and also lists Lexus IS 200t / IS250 / IS300 / IS350 2017-2020. RC owners from 2015 onward have a direct match, and the shared IS coverage gives you a cross-check on the part.
    Axleback (Muffler Version) - Lexus RC200t/ 300/ 350 [2015-2025]
    Axleback (Muffler Version) - Lexus RC200t/ 300/ 350 [2015-2025]

The 6spd AWD caveat is the real trade-off

REMARK notes that AWD owners with the 6spd transmission have reported significant drone at low RPM at cruising speed. The company also states it has not been able to experience the sound or capture video for a 6spd AWD. That is an honest gap, not a hidden defect — but it means you should treat the 6spd AWD combination as the one buyer profile where the mild, daily-friendly character is least confirmed.

For everyone else, the design intent is a deep sporty note that stays mild enough to live with. The sound still changes with engine size and type: REMARK says the IS200t is generally quieter due to its 2.0L turbocharged engine, while larger-displacement naturally aspirated models generally sound louder. On the RC side, the RC300 is described as quieter due to its 3.0L turbocharged engine, and the 3.5L V6 models generally louder.

IS200t, IS300 and the V6 cars: what changes

The hardware is the same family across both listings; the engine under the hood sets the volume and character you hear.

  • IS200t / RC200t (2.0L turbo): REMARK describes the IS200t as generally quieter due to the nature of the 2.0L turbocharged engine. If you want a noticeable step up without an overbearing cabin, this is the mildest starting point.
  • IS300 / RC300 (3.0L turbo): The RC300 is described as quieter due to its 3.0L turbocharged engine. Expect a similar restrained character rather than a large-displacement bark.
  • IS250 / IS350 / RC350 (naturally aspirated V6): REMARK states larger-displacement naturally aspirated models will generally sound louder. The V6 cars are where the deep tone is most pronounced.

Shared construction and what comes in the kit

  • Axleback (Muffler Version) - Lexus IS200T / IS250/ IS300 / IS350 [2017-2020]: Full T304 stainless steel construction, fully TIG welded, with 2.5-inch, 16-gauge mandrel-bent piping and quad 3.5-inch slant-cut tips. These are the confirmed materials and dimensions for the IS listing, useful when comparing against other axlebacks.
  • Axleback (Muffler Version) - Lexus RC200t/ 300/ 350 [2015-2025]: Kit includes both right and left side plus required hardware; installation is described as simple and straightforward with no cutting or welding, and the factory exhaust can be reinstalled. The RC listing confirms a reversible bolt-on job, which matters if you lease, plan to sell, or want to keep the stock parts.

Stainless or burnt: the only real option

Both listings offer the same two tip finishes. The finish changes appearance, not the exhaust type or piping.

  • Stainless Double Wall: Fully polished stainless steel to a high luster. The double-wall tip has an inner and outer layer of stainless steel.
  • Burnt Stainless Double Wall: The stainless is treated to add a spectrum of colors ranging from gold, purple and blue. REMARK notes this is achieved through a chemical process for improved consistency and does require more care when cleaning.

Before you order: the details that decide it

The flanges are designed to fit factory midpipes, and the listing states you will reuse factory donut gaskets and factory spring bolts and nuts. That is worth confirming against what is currently on your car before you book installation time.

The listing also states the system requires no modifications, does not trigger check engine lights and does not affect vehicle emissions. Those are the claims REMARK makes for this axleback; they are not a promise about every car's condition or local regulations.

Finally, the listing carries a no returns or exchanges note and asks you to read the disclaimer before purchasing. The limited warranty is described as eligible for purchases direct from remark-usa.com and excludes taxes and duties on international orders. Because fitment is year- and model-specific, verify your exact car against the listing before checkout rather than after delivery.

Related Articles

Customer Service
Home
Products
Cart
Profile