Back to Blog
How-to Guides 2026-11-20 REMARK Exhaust 0 views

Lexus IS500 Axleback Exhaust: Fitment and Sound FAQ

Lexus IS500 Axleback Exhaust: Fitment and Sound FAQ

Answers to common questions about the REMARK Axleback Exhaust for the Lexus IS500 (2022-2025), covering fitment, sound profile, tip options, and installation.

Fitment and Compatibility

Will the REMARK Axleback fit my Lexus IS500?
Yes, this axleback is designed specifically for the 2022-2025 Lexus IS500. It is a direct bolt-on replacement for the factory mufflers. No modifications, cutting, or welding are required, and the factory exhaust can be reinstalled easily.
Does it trigger any check engine lights?
No. The system is designed to not trigger any check engine lights and does not affect vehicle emissions.
What is included in the kit?
The kit includes both right and left side axleback sections, as well as all required hardware for installation. You will reuse your factory donut gaskets and spring bolts.

Sound and Performance

What does the exhaust sound like on the IS500?
The exhaust has an aggressive deep tone with a low grumble from idle to about 2500 RPM. Above 2500 RPM and while cruising, the exhaust note becomes subtle, allowing for easy conversation and audio system enjoyment. When you push the throttle, you get a mix of exhaust and engine induction noise, with the V8 as the primary sound.
Does the exhaust overpower the engine sound?
No. The system is designed to complement the 5.0L V8 engine sound, not overpower it. You can still hear the glorious sounds of the engine.
Does it improve exhaust flow?
Yes. The two large muffler canisters use a straight-through design to improve exhaust flow while keeping the sound level in check.

Tip Options and Finish

What tip finishes are available?
Two variants are offered: Stainless Double Wall (fully polished stainless steel) and Burnt Stainless Double Wall (heat-treated for a spectrum of gold, purple, and blue colors). Both have double-wall construction for a thicker, more luxurious appearance.
What size are the tips?
The tips are 4 inches in diameter with a slant-style design, and they feature an inner and outer layer of stainless steel.

Installation and Care

How difficult is installation?
Installation is straightforward and simple. It is a bolt-on procedure with no cutting or welding required. The factory exhaust can be reinstalled easily at any time.
Are there any special care instructions for the burnt finish?
Yes. The burnt finish is achieved through a chemical process for improved consistency and requires more care when cleaning. Please refer to the product disclaimer for specific care guidelines.
What is the weight of the system?
The complete axleback system weighs 42 pounds.

Key Specifications at a Glance

Related Articles

Customer Service
Home
Products
Cart
Profile