Back to Blog
How-to Guides 2026-11-18 REMARK Exhaust 3 views

Axleback V1 on the Nissan 370Z Z34: Fit and Sound Questions

Axleback V1 on the Nissan 370Z Z34: Fit and Sound Questions

Straight answers on 370Z Z34 axleback fitment, V1 sound expectations, tip options, and the compatibility limits that matter before you buy.

Fitment: will the Axleback V1 bolt onto your 370Z?

Which 370Z models does the Axleback V1 fit?
The REMARK Axleback V1 is listed for the Nissan 370Z Z34 from 2009 to 2021. That covers the full Z34 production run in the catalog record, so the key check is your exact year and model, not a trim-specific note.
Is it a direct bolt-on?
The record describes it as an axle-back exhaust, bolt-on, two-piece. That means it replaces the rear muffler section rather than the full catback, and the two-piece layout is what the product is built around.
Will it fit an aftermarket exhaust system already on the car?
This is the most important compatibility limit in the record. The Axleback V1 is compatible with the REMARK Nissan 370Z Midpipe Kit, but the product explicitly will not fit an aftermarket exhaust system. If your car has a non-REMARK midpipe or catback, confirm the setup before ordering.
What piping and tip sizes are confirmed?
Piping is 2.5 inch, 16 gauge, mandrel bent. Tips are a 4.5 inch slant-style design. Those are the stated dimensions, so measure your bumper cutout and current tip clearance against them if appearance matters to you.

Confirmed Axleback V1 details

  • Axleback V1 - Nissan 370Z Z34 (2009-21): Axleback V1 for Nissan 370Z Z34 (2009-2021), part number RO-TS34-S / RO-TS34-D / RO-TT34-S / RO-TT34-D depending on tip option The part number changes with the tip style, so match the exact variant you want before ordering.
    Axleback V1 - Nissan 370Z Z34 (2009-21)
    Axleback V1 - Nissan 370Z Z34 (2009-21)
  • Axleback V1 - Nissan 370Z Z34 (2009-21): Exhaust type: axle back exhaust, bolt on 2pc; piping 2.5 inch, 16 gauge, mandrel bent; tip diameter 4.5 inch slant style These are the physical specs that determine whether the rear section suits your car and your preferred look.
  • Axleback V1 - Nissan 370Z Z34 (2009-21): T304 stainless steel piping and high-flow T304 stainless steel muffler; optimal weight reduction from the factory mufflers Stainless construction and a lighter rear section are the practical ownership points, not just marketing claims.

Sound: what to expect from the V1 on a VQ37

What does the Nissan 370Z Axleback V1 sound like?
The supplied record does not include a sound clip, decibel figure, or a written tone description beyond calling it a quick, clean and cost-effective way to rev up the 370Z. Treat any specific tone claim as something to verify with a clip or in person rather than assume.
Will it drone on the highway?
Drone is not addressed in the supplied information. Because the V1 is an axleback that keeps the rest of the exhaust system in place, the practical answer depends on your midpipe and driving speed. The record does not confirm or deny drone, so ask for real-world feedback if highway comfort is a priority.
Is it a full catback or just the rear section?
It is an axleback, so it replaces the rear muffler section. That makes it a smaller change than a catback and the reason the record describes it as a cost-effective first step. If you want a larger sound change, a catback or the REMARK midpipe kit is the relevant comparison.

Tip styles: which Axleback V1 variant should you pick?

The V1 is sold by tip style, and availability differs by variant. The record lists four tip styles, with two currently marked out of stock or on special offer.

  • Stainless Double Wall: Listed as available. A conservative stainless finish that matches the T304 stainless construction.
  • Burnt Stainless Double Wall: Listed as available. The burnt finish is the cosmetic alternative if you want a more distinct rear-end look.
  • Stainless Single Wall: Marked out of stock with an ETA of mid-November in the record. Check current availability before planning around it.
  • Burnt Stainless Single Wall: Marked as a special offer in the record. Confirm the price and stock status at checkout.

Install and ordering questions before you commit

Does the record include installation steps?
No. The supplied information describes the system as bolt-on and two-piece but does not provide torque specs, hardware lists, or a step-by-step procedure. Use the manufacturer's instructions or a qualified installer rather than improvising safety-critical steps.
Can I return the Axleback V1 if it does not fit?
The record states no returns or exchanges are accepted. That makes pre-order fitment checks essential, especially the aftermarket-exhaust exclusion and the exact 2009-2021 Z34 application.
What does the warranty cover?
The record references a REMARK Limited Warranty and notes eligibility for purchases direct from www.remark-usa.com, excluding taxes and duties on international orders. Read the linked disclaimer before purchasing, as the record directs.
Is the catalog price the final price?
The catalog lists USD 465.50 against a comparison price of USD 665.00. Taxes, duties, and international order terms are separate, so confirm the total at checkout.

Related Articles

Customer Service
Home
Products
Cart
Profile