What This Y-Pipe Kit Does for Your Nissan Z RZ34
The REMARK Y-Pipe Kit for the 2023+ Nissan Z RZ34 replaces the factory Y-section with a dual mandrel-bent T304 stainless steel assembly. It bolts directly to the downpipes and is designed to reduce exhaust backpressure, allowing the system to flow more freely. The kit includes flex couplers on each leg to reduce stress on the merge collector, which helps with long-term durability.
This Y-pipe does not eliminate the catalytic converters — those remain on the downpipes. It is a direct bolt-on upgrade that can be used with the REMARK Midpipe Kit and Axleback Kit to form a complete catback system, or with the factory OEM exhaust.
Installation Checkpoints Supported by the Product Record
The following steps are based on information confirmed in the product record. Always refer to the full disclaimer and manufacturer instructions before beginning.
- Confirm vehicle compatibility: This Y-Pipe Kit is designed specifically for the 2023+ Nissan Z RZ34. Verify your vehicle's year and model before ordering.
- Gather tools and workspace: You will need standard hand tools (wrenches, sockets) and a safe lifting setup. The kit is a direct bolt-on, but working under the vehicle requires proper support.
- Remove the factory Y-pipe: Unbolt the existing Y-pipe from the downpipes and the midpipe or rear section. The REMARK Y-pipe bolts directly to the downpipes, so access to those flanges is necessary.
- Install the REMARK Y-Pipe Kit: Position the new Y-pipe so the flex couplers align with the downpipe outlets. Hand-tighten all fasteners, then torque to the vehicle manufacturer's specifications (not supplied in the product record).
- Connect to the midpipe or OEM exhaust: The Y-pipe outlet is designed to mate with the REMARK Midpipe Kit or the factory OEM exhaust. Ensure a secure, leak-free fit before tightening fully.
- Check for clearance and stress: The flex couplers help reduce stress on the merge collector, but verify that no part of the Y-pipe contacts the chassis, suspension, or heat-sensitive components.
- Final torque and test: Tighten all connections to the recommended torque values from your vehicle service manual. Start the engine and check for exhaust leaks at each joint.
Important Pre-Install Notes
REMARK does not accept returns or exchanges on this Y-Pipe Kit. Confirm fitment and condition before installation. The product record includes a disclaimer that must be read before purchasing. No installation-specific torque values or thread-locker recommendations are provided in the product record; follow your vehicle's factory procedures for those details.
The Y-pipe is made from T304 stainless steel with hand-crafted TIG welding. It is covered by the REMARK Limited Warranty for purchases made directly from remark-usa.com. International orders may be subject to additional taxes and duties.
Y-Pipe Kit Specifications at a Glance
- Y-Pipe Kit - Nissan Z - RZ34 (2023+): Dual 2.5" to 3.0" mandrel-bent T304 stainless steel Y-pipe with flex couplers on each leg. The flex couplers reduce stress on the merge collector, and the larger diameter improves exhaust flow compared to the factory Y-section.

Y-Pipe Kit - Nissan Z - RZ34 (2023+) - Y-Pipe Kit - Nissan Z - RZ34 (2023+): Direct bolt-on to downpipes; compatible with REMARK Midpipe Kit or factory OEM exhaust. You can install this as a standalone upgrade or as part of a full catback system without modifying other components.
- Y-Pipe Kit - Nissan Z - RZ34 (2023+): Does not eliminate catalytic converters (they remain on the downpipes). This keeps the vehicle compliant with emissions equipment requirements and avoids the need for additional tuning in most cases.
- Y-Pipe Kit - Nissan Z - RZ34 (2023+): No returns or exchanges accepted on this item. Double-check compatibility and inspect the kit upon arrival before any installation work begins.


